Throttle Body Cleaning
  1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
  1. Turn the ignition switch ON (II).
  1. Reset the ECM with the HDS.
  1. Select the ETCS TEST in the INSPECTION MENU with the HDS.
  1. Select TP POSITION CHECK and clear the throttle position (TP) learned value.
  1. Turn the ignition switch OFF.
  1. Turn the ignition switch ON (II), and wait for 2 seconds without pressing the accelerator pedal.
  1. Do the ECM idle learn procedure.