Injector Replacement
  1. Coat the new O-ring (Black) (A) with clean engine oil, and insert the injectors (B) into the fuel rail (C).
  1. Install the injector clip (D).
  1. Coat the injector O-ring (Brown) (E) with clean engine oil.
  1. Install the fuel rail and the injector into the cylinder head (F).
  1. Install the fuel rail mounting nuts.
  1. Connect the injector connectors.
  1. Connect the quick-connect fitting.
  1. Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for about 2 seconds, the fuel pressure in the fuel line rises. Repeat this 2 or 3 times, then check for fuel leakage.
  1. Install the fuel pipe cover.
  1. Install the cowl cover and under-cowl panel.