DLC Circuit Troubleshooting - PGM-FI System
  1. Check for continuity between ECM connector terminal C36 and body ground.
Is there continuity?
YES -
Repair open in the wire between the ECM (C9) and the No. 2 FUEL PUMP (15 A) fuse, between the No. 2 FUEL PUMP (15 A) fuse and PGM-FI main relay 2 (FUEL PUMP), or between the immobilizer control unit. Also replace the No. 2 FUEL PUMP (15 A) fuse.■
NO -
Go to Step 49 .
  1. Remove the access panel from the floor.
  1. Disconnect the fuel pump 4P connector.