Windshield Replacement
  1. Attach the side rubber dam (A), lower rubber dam (B) with adhesive tape A, and clips (C) with adhesive tape B to the inside face of the windshield (D) as shown:
    • Be sure the side rubber dam and clips line up with the alignment marks (E).
    • Be careful not to touch the windshield where adhesive will be applied.
    Adhesive tape A:
    Thickness 0.16 mm (0.006 in.)
    Adhesive tape B:
    Thickness 0.4 mm (0.02 in.)
    Width 13 mm (0.51 in.)