Roof Glass Replacement
  1. Attach the fastener (A) with adhesive tape A, and clip (B) with adhesive tape B to the inside face of the roof glass (C) as shown:
    • Be sure the fastener line up with the alignment marks (D).
    • Be careful not to touch the roof glass where adhesive will be applied.
    Adhesive tape A:
    Thickness 0.6 mm (0.024 in.)
    Adhesive tape B:
    Thickness 0.4 mm (0.016 in.)
    Width 18 mm (0.71 in.)

  1. Attach the seal (E) with adhesive tape C on the clip. Be careful not to touch the roof glass where adhesive will be applied.
    Adhesive tape C:
    Thickness 0.16 mm (0.006 in.)