-
Attach the rubber dams A, B (A, B) with adhesive tape A, rubber dam C (C) with adhesive tape B, rubber dam D (D) with adhesive tape C, clip (E) with adhesive tape D, and fasteners (F) with adhesive tape E to the inside face of the rear window (G) as shown:
-
Before installing the rubber dams, clip and fasteners, apply primer to the area where its adhesive tapes will be stuck in inside face of the rear window.
-
Be sure the rubber dams, clip and fasteners with the alignment marks (H) on the upper edge of the rear window.
-
Be careful not to touch the rear window where adhesive will be applied.
|
Adhesive tape A:
|
Thickness 0.16 mm (0.006 in.)
Width 5 mm (0.2 in.)
|
|
Adhesive tape B:
|
Thickness 0.16 mm (0.006 in.)
Width 3 mm (0.12 in.)
|
|
Adhesive tape C:
|
Thickness 0.6 mm (0.24 in.)
Width 7.5 mm (0.29 in.)
|
|
Adhesive tape D:
|
Thickness 0.4 mm (0.02 in.)
Width 10 mm (0.4 in.)
|
|
Adhesive tape E:
|
Thickness 0.6 mm (0.024 in.)
|
|
|