Quarter Glass Replacement
NOTE:
  • Put on gloves to protect your hands.
  • Wear eye protection when removing the glass with piano wire.
  • Use seat covers to avoid damaging any surfaces.
  • Use glass adhesive set P/N 08C73-X0230N.
  1. Remove the rear pillar trim:
    • Without side curtain airbags
    • With side curtain airbags
  1. Remove the front seal (A) and rubber dam (B) from the edge of the quarter glass (C). If necessary, cut the rubber dam with a utility knife.
  1. Apply protective tape to along the inside and outside edges of the body. Using an awl, make a hole through the adhesive from inside the vehicle. Push a piece of piano wire through the hole, and wrap each end around a piece of wood.