Make sure you have the anti-theft code for the audio or the navigation system (if equipped), then write down the audio presets.

Make sure the ignition switch is OFF.

Disconnect the negative battery cable, then disconnect the positive cable, and wait at least 3 minutes.

Remove the screws (A) for the alternator and battery cable terminals from the under-hood fuse/relay box.

Remove the bottom cover from the under-hood fuse/relay box.

Disconnect the connectors from the under-hood fuse/relay box.

Carefully remove the relays by prying under the base of the relay.

NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.