Door Lock Knob Switch Test
Passenger's/Rear Door
  1. Remove the passenger's door panel.
  1. Disconnect the 10P connector (A) from the door lock actuator (B).
  1. Check for continuity between the terminals.
    • There should be continuity between the No. 8 [No. 7] and No. 10 [No. 5] terminals when the door lock knob switch in the UNLOCK position.
    • There should be no continuity when the door lock knob switch is in the LOCK position.
    [ ]:
    RHD type

  1. If the continuity is not specified, replace the door lock actuator.