Rear Seat Disassembly/Reassembly
  1. If necessary, remove the bushing (A) and pivot washer (B).
  1. Reassemble the seat-back and seat cushion in the reverse order of disassembly, and note these items:
    • Apply multipurpose grease to the moving portions of the recline adjusters.
    • Replace the wire tie you removed with a new one.
    • Make sure the seat lock cable is routed properly.
    • Make sure the seat lock cable is connected securely.
    • Check if the bushing and pivot washer is damaged or stress-whitened, and if necessary, replace it with new ones.
    • Push the tabs and hooks into place securely.