Mirror Holder Replacement
NOTE: When prying with a flat-tipped screwdriver, wrap it with protective tape to prevent damage.
  1. Adjust the mirror fully to the inward position.
  1. Insert a long, thin flat-tipped screwdriver along the notch (A) on the mirror holder (B). Slide the tip of the screwdriver between the mirror holder and the actuator (C).
  1. Quickly twist the screwdriver to separate the mirror holder from the mirror actuator.
  1. Insert the screwdriver further under the mirror holder and twist it again.
    NOTE: Do not pry up on the mirror holder to separate the two parts, as this can cause either the mirror glass or actuator to break.