Interior Trim Removal/Installation - Pillar Area - With Side Curtain Airbags
  1. Reinstall the rear pillar trim (A).
    -1.
    Insert the upper of the trim into the hole (B).
    -2.
    Place the trim over the rear pillar (C), and fit its upper clip (D) and clip into the holes (E) in the rear pillar, then lightly push the trim into place.
    NOTE:
    • Make sure the side curtain airbag isn't tucked down under the clips and ribs.
    • Push lightly on the upper clip. If you push too hard, the clip will be damaged, and it will not hold the trim properly.
  1. Reinstall the upper anchor bolt, and the upper anchor cap.