Interior Trim Removal/Installation - Pillar Area - With Side Curtain Airbags
  1. Reinstall the front pillar trim (A).
    -1.
    Insert the bottom of the trim into the dashboard (B).
    -2.
    Place the trim over the front pillar (C), and fit its upper clip (D) and lower clip into the holes (E) in the front pillar, then lightly push the trim into place.
    NOTE:
    • Make sure the side curtain airbag isn't tucked down under the clips and ribs.
    • Push lightly on the upper clip. If you push too hard, the clip will be damaged, and it will not hold the trim properly.
  1. Reinstall the front door opening trim.