Take care not to scratch the dashboard and related parts.
Do not pry the panel surface with any tools to prevent damage.
When removing components, use the trim tools or equivalent.
LHD is shown; RHD is symmetrical.
Tilt the steering column down.
Gently pull out the bottom of the instrument lower panel (A) to detach the clips, and disconnect the in-car temperature sensor connector (B) and air hose (C).
Install the instrument lower panel in the reverse order of removal, and note these items:
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
Make sure the in-car temperature sensor connector is plugged in properly, and the air hose id connected securely.