Side Impact Sensor (First) Replacement
NOTE: Review the seat replacement procedure before doing repairs or service.
Removal
  1. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
  1. Disconnect the appropriate side airbag 2P connector.
  1. Remove the seat assembly.
  1. Remove the front door sill inner trim.
  1. Disconnect the floor wire harness 4P connector from the side impact sensor (first).
  1. Remove the cover (A) and using a TORX T30 bit, remove the TORX bolt (B), then remove the side impact sensor (first) (C).