Maintenance Schedule for Normal Conditions - EU
80,000km(4year)
Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.
Service at the indicated distance or time whichever comes first.
|
|
|
Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator.
|
|
|
|
|
|
|
Check the brake pad and disc thickness. Check damage and cracks.
|
|
|
Check the brake linings for cracking, grazing, wear, and contamination.
|
|
|
|
|
|
|
Check parking brake operation.
|
|
|
|
|
|
If the vehicle driven primarily in urban areas that have high concentrations of soot in the air, under dusty conditions or the air flow from the heating and cooling system becomes less than usual, replace the filter every 20,000 km (12,500 miles) or 1 year.
|
|
|
|
|
|
Check the position of the headlights.
|
|
|
|
Test drive (noise, stability, dashboard operation)
|
|
|
|
|
|
Check expiry date for temporary repair kit bottle
|
|
|
|
|
Visually inspect the following items:
|
|
|
|
Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
|
|
|
Check tightness of screws, nuts, and joints. If necessary, retighten.
|
|
|
|
|
|
Check steering linkage.
|
|
|
Check the boot for damage and leaking grease.
|
|
|
|
|
|
|
|
Check the bolts for tightness.
|
|
|
Check all dust cover for deterioration and damage.
|
|
|
|
|
|
|
|
Check the boot and boot band for cracks.
|
|
|
Check boots for leaking grease.
|
|
|
|
|
|
|
Check master cylinder, and VSA modulator-control unit damage and leakage.
|
|
|
|
|
All fluid level and check for leak
|
|
|
Check level and look for leaks. If necessary, add.
|
|
|
|
|
|
|
|
Check the exhaust pipe and muffler for damage, leaks, and tightness.
|
|
|
|
|
|
|
Check fuel lines for loose connections, cracks, and deterioration.
|
|
|
Retighten loose connections and replace any damage parts.
|
|
|
|
|
|
Tyre condition
|
|
|
Check pressure, puncture, or cuts and irregular thread wear.
|
|
|
Every 40,000 km (25,000 miles)
Every 120,000 km (75,000 miles) or 8 years
Every 3 years
|
|
|
|
Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid.
|
|
|
Check the brake fluid level is between upper and lower marks on the reservoir.
|
|
|
|
Every year
|
|
Inspect vehicle corrosion:
|
|
|
refer to the Body Repair Manual
|
|
|
External Paintwork and panel Corrosion Check.
|
|
|
Under body Corrosion Check.
|
|
|
|