Maintenance Schedule for Normal and Severe Conditions - Russia
45,000km(3year)
Type R Model
This maintenance schedule outlines the minimum required maintenance that you should perform to ensure the trouble-free operation of the vehicle. Due to regional and climatic differences, some additional servicing may be required. Please consult the warranty booklet for a more detailed description.
The following items must be used for ‘‘Severe Conditions'' indicated on schedule if the vehicle is driven MAINLY under following conditions.
Engine oil and engine oil filter: A/B/C/D/E
A: Driving less than 8 km (5 miles) per trip or, in freezing temperature, driving less than 16 km (10 miles) per trip.
B: Driving in extremely hot over 35 °C (95 °F) conditions.
C: Extensive idling, or long periods of stop-and-go driving.
D: Trailer towing, driving with a car-top carrier, or driving in mountainous conditions.
E: Driving on muddy, dusty, or de-iced roads.
NOTE: If the customer's vehicle is driven OCCASIONALLY under severe conditions, follow the Normal Conditions Maintenance Schedule.
Service at the indicated distance or time whichever comes first.
|
|
|
Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator.
|
|
|
|
|
|
|
Check the brake pad and disc thickness. Check damage and cracks.
|
|
|
Check the brake linings for cracking, grazing, wear, and contamination.
|
|
|
|
|
|
|
Check the position of the headlights.
|
|
|
|
Test drive (noise, stability, dashboard operation)
|
|
|
|
|
|
Inspect vehicle corrosion:
|
|
|
refer to the Body Repair Manual
|
|
|
External Paintwork and panel Corrosion Check.
|
|
|
Under body Corrosion Check.
|
|
|
|
|
Visually inspect the following items:
|
|
|
|
Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
|
|
|
Check tightness of screws, nuts, and joints. If necessary, retighten.
|
|
|
|
|
|
Check steering linkage.
|
|
|
Check the boot for damage and leaking grease.
|
|
|
|
|
|
|
|
Check the bolts for tightness.
|
|
|
Check all dust cover for deterioration and damage.
|
|
|
|
|
|
|
|
Check the boot and boot band for cracks.
|
|
|
Check boots for leaking grease.
|
|
|
|
|
|
|
Check master cylinder, VSA modulator-control unit and damage and leakage.
|
|
|
|
|
All fluid levels and condition of fluid
|
|
|
Check levels and look for leaks. If necessary, add.
|
|
|
|
|
|
|
|
Check the exhaust pipe and muffler for damage, leaks, and tightness.
|
|
|
|
|
|
|
Check fuel lines for loose connections, cracks, and deterioration.
|
|
|
Retighten loose connections and replace any damage parts.
|
|
|
|
|
|
Tyre condition
|
|
|
Check pressure, puncture, or cuts and irregular thread wear.
|
|
|
Every 7,500 km or 6 months
Every 120,000 km
At 200,000 km or 10 years, thereafter every 100,000 km or 5 years
|
|
|
Use genuine Honda All Season Antifreeze/Coolant Type 2.
|
|
|
Every 3 years
|
|
|
|
Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid.
|
|
|
Check that brake fluid level is between upper and lower marks on the reservoir.
|
|
|
|