Maintenance Schedule for Normal and Severe Conditions - Except EU, Australia and New Zealand
75,000miles(6year)
Type R Model
This maintenance schedule outlines the minimum required maintenance that you should perform to ensure the trouble-free operation of the vehicle. Due to regional and climatic differences, some additional servicing may be required. Please consult the warranty booklet for a more detailed description.
The following items must be used for ‘‘Severe Conditions'' indicated on schedule if the vehicle is driven MAINLY under following conditions.
A: Driving less than 8 km (5 miles) per trip or, in freezing temperatures, driving less than 16 km (10 miles) per trip.
B: Driving in extremely hot over 35 °C (95 °F) conditions.
C: Extensive idling or long periods of stop-and-go driving.
D: Trailer towing, driving with a car-top carrier, or driving in mountainous conditions.
E: Driving on muddy, dusty, or de-iced roads.
NOTE: If the vehicle is driven OCCASIONALLY drive under severe conditions, follow the Normal Conditions Maintenance Schedule.
Service at the indicated distance or time whichever comes first
|
|
|
Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator
|
|
|
|
|
|
Check parking brake operation
|
|
|
|
Visually inspect the following items:
|
|
|
|
Check for correct installation and position, check for cracks, deterioration, rust, and leaks
|
|
|
Check tightness of screws, nuts, and joints. If necessary, retighten
|
|
|
|
|
Check the master cylinder, VSA modulator-control unit damage and leakage
|
|
|
|
All fluid levels and condition of fluids
|
|
|
Check levels and if necessary, look for leaks
|
|
|
|
|
|
|
|
Check the catalytic converter heat shield, exhaust pipe, and muffler damage, leaks, and tightness
|
|
|
|
|
|
|
Check fuel lines for loose connections, cracks, and deterioration
|
|
|
Retighten loose connections and replace any damaged parts
|
|
|
|
Every 10,000 km (6,250 miles) or 1 year
Every 5,000 km (3,175 miles) or 6 months
Every 10,000 km (6,250 miles) or 6 months
|
|
|
|
Check the brake pad and disc thickness. Check for damage or cracks
|
|
|
Check the brake linings for cracking, grazing, wear, and contamination
|
|
|
|
|
Visually inspect the following items:
|
|
|
|
|
|
Check rack grease and steering linkage
|
|
|
Check the boot for damage and leaking grease
|
|
|
|
|
|
|
|
Check the bolts for tightness
|
|
|
Check all dust covers for deterioration and damage
|
|
|
|
|
|
|
|
Check the boot and boot band for cracks
|
|
|
Check rack grease
|
|
|
|
Every 20,000 km (12,500 miles)
Every 40,000 km (25,000 miles)
|
|
|
Check the valve clearance
|
|
|
Every 100,000 km (62,500 miles)
At 200,000 km (120,000 miles) or 10 years, there after every 100,000 km (60,000 miles) or 5 years
|
|
|
Use genuine Honda All Season Antifreeze/Coolant Type 2
|
|
|
Every 3 years
|
|
|
|
Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid
|
|
|
Check the brake fluid level is between upper and lower marks on the reservoir
|
|
|
|
Every 10,000 km (6,250 miles)
|
|
Rotate tyres
|
|
|
Check tyre inflation and condition at least once per month
|
|
|