DTC Troubleshooting: P2786 (162-1)
DTC P2786:
 Transmission Shift Change Actuator Temperature Too High
  1. Turn the ignition switch ON (II).
  1. Clear the DTCs with the HDS.
  1. Wait for an hour.
  1. Start the engine.
  1. Test-drive for more than 10 minutes.
  1. Check for DTCs with the HDS.
Is DTC P2786 indicated?
YES -
Go to Step 7 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Check if the shift arm (A) moves smoothly.
Does the shift arm move smoothly?
YES -
NO -
Repair the transmission internal failure.■