DTC Troubleshooting: P0562 (138-3)
DTC P0562:
 TCM Power Source Circuit (+B) Low Voltage
NOTE: Before troubleshooting, check if the battery condition and charging system are OK.
  1. Turn the ignition switch ON (II).
  1. Clear the DTCs with the HDS.
  1. Turn the ignition switch OFF.
  1. Turn the ignition switch ON (II).
  1. Check for DTCs with the HDS.
Is DTC P0562 indicated?
YES -
Check for poor connections or loose terminals at the under-hood fuse/relay box and the TCM. If OK, substitute a known-good TCM, then recheck. If the symptom/indication goes away with a known-good TCM, replace the original TCM. ■
NO -
Intermittent failure, the system is OK at this time.■