VSA DTC Troubleshooting: 97
DTC 97:
 VSA System
  1. Turn the ignition switch ON (II).
  1. Check for DTCs with the HDS.
Is another DTC indicated?
YES -
Do the appropriate troubleshooting for the DTC.■
NO -
Go to Step 3 .
  1. Clear the DTC with the HDS.
  1. Test-drive the vehicle in a straight line. Accelerate the vehicle up to 10 km/h (6 mph), and stop, then accelerate up to 10 km/h (6 mph).
Is DTC 97 indicated?
YES -
NO -
Intermittent failure, the system is OK at this time. Check for loose terminals at the VSA modulator-control unit 46P connector. Refer to intermittent failures troubleshooting. ■