Deflation Warning System Initialization
Do the deflation warning system initialization after doing the following items.
  • Rotating the tyres.
  • Replacing the tyre(s).
  • Adjust the tyre pressure.
  • Replace the VSA modulator-control unit.
  1. Turn the ignition switch to ON (II).
    NOTE: Vehicle must be stopped with the transmission in P or N.
  1. Press and hold the INFO button (A) for more than 3 seconds to enter the customizing mode.
  1. Press the INFO button repeatedly until symbol (B) is displayed, then press the SEL/RESET button (C).
  1. Select ‘‘OK'' by pressing the INFO button, then press the SEL/RESET button to set.
    NOTE:
    • If ‘‘COMPLETE'' is displayed in the multi-information display, deflation warning system learning procedure is completed.
    • If ‘‘FAILED'' is displayed in the multi-information display, go to the symptom troubleshooting.