|
DTC P2787:
Clutch Temperature Too High (Over 400 °C (752 °F))
NOTE:
-
DTC P2787 is stored when the clutch temperature is higher than 400 °C (752 °F), and the i-SHIFT indicator comes on.
-
When the clutch temperature is lower than 300 °C (572 °F), the i-SHIFT indicator goes off.
-
If DTC P2787 is stored, the system stops the creeping control.
-
The value of the clutch temperature is reset when the DTC is cleared with the HDS.
-
The clutch temperature is high when the UP/DOWN operation is done frequently at a short time.
-
Turn the ignition switch to ON (II).
-
Clear the DTCs with the HDS.
-
Test-drive for more than 10 minutes.
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
-
Turn the ignition switch to LOCK (0).
-
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
The system is OK at this time (failure by air in the fluid).■
|
|