DTC Troubleshooting: P2786 (162-1)
DTC P2786:
 Transmission Shift Change Actuator Temperature Too High
  1. Turn the ignition switch to ON (II).
  1. Clear the DTCs with the HDS.
  1. Wait for at least 1 hour.
  1. Test-drive for more than 10 minutes.
  1. Check for DTCs with the HDS.
Is DTC P2786 indicated?
YES -
Go to Step 6 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Check if the shift arm (A) moves smoothly.
Does the shift arm move smoothly?
YES -
NO -
Repair the transmission internal failure.■