|
DTC P2785:
Clutch Actuator Temperature Too High
-
Turn the ignition switch to ON (II).
-
Clear the DTCs with the HDS.
-
Turn the ignition switch to LOCK (0).
-
Turn the ignition switch to ON (II).
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
-
Check the CLUTCH ACTUATOR TEMPERATURE and the TCM POWER CIRCUIT BOARD TEMPERATURE in the DATA LIST with the HDS.
|
Is the clutch actuator temperature about 195 °C (383 °F) or more, or the TCM power circuit board temperature about 118 °C (244 °F) or more?
|
|
YES
|
-
|
Turn the ignition switch to LOCK (0), and wait about an hour, then recheck. If the temperature is lower, system is OK.■
|
|
NO
|
-
|
|
|