|
|
Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and water as soon as possible after handling used oil.
|
For the details of lubrication points and type of lubricants to be applied, refer to the illustrated index and various work procedures (such as Assembly/Reassembly, Replacement, Overhaul, Installation, etc.) contained in each section.
|
Lubrication Points
|
Lubricant
|
|
A
|
Engine
|
Highly recommended genuine Honda Motor Oil , or 0W-30 synthetic motor oil meeting the minimum specification:
On vehicle with DPF model: ACEA C2 or ACEA C3
On vehicle without DPF model: ACEA A1/B1, ACEA A3/B3, or ACEA A5/B5
ACEA viscosity: See chart.
|
|
B
|
Manual transmission
|
Honda manual transmission fluid (MTF)
Always use genuine Honda MTF
*
. Using motor oil can cause stiffer shifting because it does not contain the proper additives.
|
|
C
|
Brake system (includes VSA lines)
|
Brake Fluid DOT 3 or DOT 4
We recommend genuine Honda Brake Fluid. Using a non-Honda brake fluid can cause corrosion and decrease the line of the system.
|
|
D
|
Clutch line
|
Brake Fluid DOT 3 or DOT 4 We recommend genuine Honda Brake Fluid. Using a non-Honda brake fluid can cause corrosion and decrease the line of the system.
|
|
E
F
G
H
I
J
K
L
M
|
Release fork
Battery terminals
Brake booster clevis pin
Clutch master cylinder clevis pin
Shift lever
Door hinges
Fuel fill door
Hood hinges and hood latch
Tailgate hinges
|
Multipurpose Grease
|
|
N
|
Brake caliper piston seals
|
Rubber Grease
|
|
O
P
|
Brake caliper piston boots, piston pins and boots
Shift cable ends
|
Silicone Grease
|
|
Q
|
Air conditioning compressor
|
Compressor oil: SP-10 (P/N 38897-P13-003, 38898-P13-003, or 38899-P13-A01)
For refrigerant HFC-134a (R-134a)
|
|
R
|
Cooling system
|
Honda All Season Antifreeze/Coolant Type 2
|
|
|
If genuine Honda MTF is not available, use API service SL or higher grade motor oil with a viscosity of SAE 10W-30 or 10W-40 as a temporary replacement.
|
|
