Remove the master cylinder.

Disconnect the brake booster vacuum hose (A).

Remove the engine wire harness bracket (A).

Remove the A/C line bracket (A).

Remove the lock pin (A) and the joint pin (B), then loosen the nut (C), and disconnect the yoke (D) from the brake pedal.

Remove the brake booster mounting nuts (E).

Remove the yoke from brake booster rod (F).

Pull the brake booster forward.

• Be careful not to damage the booster surfaces and the threads on the booster stud bolts.
• Be careful not to bend or damage the brake lines.

Remove the brake booster (A) by pulling it out and turning it, and remove it from the engine compartment.

Install the brake booster in the reverse order of removal, and note these items: