CKP Pulse Plate Replacement
  1. Remove the front wheels.
  1. Support the engine with a jack and a wood block under the oil pan.
  1. Remove the CKP pulse plate.
  1. Install the CKP pulse plate.
  1. Remove all of the old liquid gasket from the chain case mating surfaces, bolt and bolt holes.
  1. Clean, and dry the chain case mating surfaces.
  1. NOTE: Do not install the parts if 5 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing old residue.
  1. NOTE:
    • When installing the chain case, do not slide the bottom surface onto the oil pan mounting surface.
    • Wait at least 30 minutes before filling the engine with oil.
    • Do not run the engine for at least 3 hours after installing the chain case.
  1. Raise the lift to full height.
  1. Lower the vehicle on the lift.
  1. Raise the lift to full height.
  1. Lower the vehicle on the lift.
  1. Lower the vehicle on the lift.