Remove the front wheels.

Remove the engine undercover.

Remove the drive belt.

Hold the pulley with handle (A) and pulley holder (B).

Remove the bolt with a 19 mm socket (C) and breaker bar, then remove the crankshaft.

Clean the crankshaft pulley (A), crankshaft (B), bolt (C), and washer (D). Lubricate as shown.

○:	Clean
•:	Lubricate

Install the crankshaft pulley, and hold the pulley with handle (A) and pulley holder (B).

Tighten the bolt to 49 N·m (5.0 kgf·m, 36 lbf·ft) with a torque wrench and 19 mm socket (C). Do not use an impact wrench.

Tighten the pulley bolt an additional 90 °.

Install the drive belt.

Install the engine undercover.

Install the front wheels.