-
-
-
Check the cylinder head for warpage. Measure along the edges, and three ways across the center.
-
If warpage is less than 0.05 mm (0.002 in.), cylinder head resurfacing is not required.
-
If warpage is between 0.05 mm (0.002 in.) and 0.2 mm (0.008 in.), resurface the cylinder head.
-
Maximum resurface limit is 0.2 mm (0.008 in.) based on a height of 104 mm (4.09 in.).
|
Cylinder Head Height
|
|
Standard (New):
|
103.95−104.05 mm (4.093−4.096 in.)
|
|
|
