Remove the engine cover.

Remove the drive belt.

Remove the alternator.

Remove the A/C compressor. Do not disconnect the A/C line from the compressor.

Remove the thermostat housing.

Remove the oil filter housing assembly (A).

Remove the oil filter assembly, engine oil cooler, drive belt auto-tensioner, and water pump, then replace the oil filter housing.

Reassemble the oil filter housing reverse order of removal, then install the oil filter housing using the new O-rings (B).

Install the thermostat housing.

Install the A/C compressor.

Install the alternator.

Install the drive belt.

Install the engine cover.