Hold the pulley with handle (A) and holder attachment (B).
Remove the bolt with a 19 mm socket (C) and breaker bar.
Installation
Clean the crankshaft pulley (A), crankshaft (B), bolt (C), and washer (D). Lubricate the new engine oil as shown.
Install the crankshaft pulley, and hold the pulley with handle (A) and holder attachment (B).
Tighten the bolt to 29 N·m (3.0 kgf·m, 22 lbf·ft) with a torque wrench and 19 mm socket (C). Do not use an impact wrench. If you are using a new pulley bolt or new crankshaft, tighten the bolt to 34 N·m (3.5 kgf·m, 25 lbf·ft).
