Support the engine with a jack and wood block under the oil pan.

Remove the bolt (A) securing the A/C line, then remove the upper torque rod (B).

Remove the ground cable (A), then remove the side engine mount bracket (B).

Install the side engine mount bracket, then loosely tighten the new bolt and nut (C), and loosely tighten the bolt (D).

Install the ground cable.

Remove the air cleaner housing assembly.

Loosen the transmission mounting bolt and nuts (A).

Raise the hoist to full height.

Remove the engine undercover.

Loosen the lower torque rod mounting bolt (A).

Lower the vehicle on the hoist.

Tighten the side engine mount mounting bolts and nut.

Tighten the transmission mounting bolt and nuts.

Raise the hoist to full height.

Tighten the lower torque rod mounting bolt.

Install the engine undercover.

Lower the vehicle on the hoist.

Install the air cleaner housing assembly.

Install the upper torque rod (A), then tighten the new upper torque rod mounting bolts in the numbered sequence shown.

Install the bolt (B) securing the A/C line.