Radiator and Fan Replacement
-
Disconnect the negative cable from the battery first, then disconnect the positive cable.
-
Remove the battery.
-
-
Remove the clutch fluid reservoir mounting bolt (A), and remove the clutch line from the clamps (B)(with i-SHIFT).
-
|
|
-
Disconnect the fan motor connectors (A) and hood switch connector (B), then remove the harness clamps (C).
|
|
-
Remove the upper radiator hose (A) and lower radiator hose (B).
|
|
-
Remove the engine undercover.
|
|
-
Disconnect the engine coolant temperature (ECT) sensor 2 connector (A), and remove the harness clamp (B).
|
|
-
Remove the radiator upper bracket mounting bolts (A), then remove the bulkhead (B).
|
|
-
Pull up the radiator, then remove the fan shroud assemblies and other parts from the radiator.
-
Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
-
Install the bulkhead in the reverse order of removal. Apply body paint to the bulkhead mounting bolts.
-
|
|
-
Pull up the radiator, then remove the fan shroud assemblies and other parts from the radiator.
|
|
|
-
Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
-
Install the bulkhead in the reverse order of removal. Apply body paint to the bulkhead mounting bolts.
-
|
