DTC Troubleshooting: B1156
DTC B1156:
 Gauge Control Module (Tach) Lost Communication with MICU (WIPSW Message)
  1. Clear the DTCs with the HDS.
  1. Turn the ignition switch OFF, and then back ON (II).
  1. Wait for 6 seconds or more.
  1. Check for DTCs with the HDS.
Is DTC B1156 indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the gauge control module (tach) is OK at this time. Check for loose or poor connections between the gauge control module (tach) and the MICU.■
  1. Check for DTCs with the HDS.
Are DTCs B1156 and B1905 indicated?
YES -
NO -