DTC Troubleshooting: B1152
DTC B1152:
 Gauge Control Module (Tach)(EEPROM) Error
  1. Clear the DTCs with the HDS.
  1. Turn the ignition switch OFF, and then back ON (II).
  1. Wait for 6 seconds or more.
  1. Check for DTCs with the HDS.
Is DTC B1152 indicated?
YES -
Replace the gauge control module (tach).■
NO -
Intermittent failure, the gauge control module (tach) is OK at this time. Check the battery condition, and the charging system.■