|
DTC 11-02:
Low/High IG1-terminal Voltage (Regular diagnosis)
-
-
Turn the ignition switch OFF.
-
Start the engine.
-
Wait at least 30 seconds.
|
Does the EPS indicator come on?
|
|
YES
|
-
|
|
|
NO
|
-
|
Check for loose wires or poor connections. If the connections are good, the system is OK at this time.■
|
-
Turn the ignition switch OFF.
-
Disconnect the EPS control unit connector D (28P).
-
Turn the ignition switch ON (II).
-
Wait at least 30 seconds, measure the voltage between EPS control unit conenctor D (28P) terminal No. 16 and body ground.
|
If the voltage between 9.20−17.4 V?
|
|
