Power Door Lock Switch Test
  1. Remove the power window master switch, and disconnect its connector.
  1. Check for continuity between the terminals.
    • There should be continuity between the No. 16 and No. 22 terminals when the door lock switch is in the LOCK position.
    • There should be no continuity between the No. 16 and No. 22 terminals when the door lock switch is in the neutral position or UNLOCK position.
    • There should be continuity between the No. 18 and No. 22 terminals when the door lock switch is in the UNLOCK position.
    • There should be no continuity between the No. 18 and No. 22 terminals when the door lock switch is in the neutral position or LOCK position.
  1. If the continuity is not as specified, replace the bulb or power window master switch.