Keyless/Power Door Locks/Security Alarm System Symptom Troubleshooting Procedures
Power Door Locks/Keyless
  1. If the door lock system works properly, but the keyless operation does not, refer to the immobilizer-keyless control unit symptom troubleshooting information.
    NOTE: The door lock system does not function when:
    • Any of the doors is open.
    • Ignition key is in the ignition key switch.
    • Ignition switch is ON (II).
    No.
    Symptom
    Check Items
    1
    The doors will not lock or unlock. *
    2
    The doors will not lock. *
    3
    The doors will not unlock. *
    4
    Keyless operation does not work (LOCK, UNLOCK).
    5
    Doors will not unlock with the transmitter, but will unlock with the door switch.
    6
    Doors will not lock with the transmitter, but will lock with the door switch.
    7
    Doors automatically relock after being unlocked with the transmitter even though a door has been opened.
    8
    Keyless operation will work even though the ignition key is in the ignition switch.

    *:
    If only one door is not working properly, check that door's lock actuator first, then check the other items listed in this table.