Front Individual Map Light Test/Replacement
  1. Turn the light switch OFF.
  1. Carefully pry off the lenses (A) with a small screwdriver.
    Map Light:
    5 W x 2

  1. Remove the two mounting screws.
  1. Disconnect the connectors (B) from the housing (C).
  1. With the map light switch DOOR position, check for continuity between the terminals in each switch position according to the table.
  1. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light.
  1. Install in the reverse order of removal.