Instrument Lower Panel Removal/Installation
NOTE:
  • Take care not to scratch the dashboard and related parts.
  • Do not pry the panel surface with any tools to prevent damage.
  • When removing components, use the trim tools or equivalent.
  • LHD is shown; RHD is symmetrical.
  1. Tilt the steering column down.
  1. Gently pull out the bottom of the instrument lower panel (A) to detach the clips, and disconnect the in-car temperature sensor connector (B) and air hose (C).
  1. Install the instrument lower panel in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Make sure the in-car temperature sensor connector is plugged in properly, and the air hose id connected securely.
    • Push the clips into place securely.