Fuel Fill Door Opener Cable Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the body and related parts.
  1. Remove these items form the vehicle:
  1. Remove the cushion tape (A), and remove the fuel fill door opener cable (B) from the clips (C, D, E). Using a clip remover, detach the clips (F).
LHD
RHD
  1. Remove the fuel fill door latch (A) from the body by turning it 90 °.
  1. Install the opener cable in the reverse order of removal, and note these items:
    • Align the marks (A) on the opener cable (B) with the cable clips (C) as shown.
    • Route the opener cable under the hood opener cable (D) and floor wire harness (E).
    • Replace any damaged clips, and replace the cushion tape.
    • Make sure the fuel fill door opens properly and locks securely.
LHD
RHD