|
NOTE: Take care not to scratch the rear bumper and body.
-
Remove the floor undercover (A).
|
-1.
|
Remove the bolts (B) that secure the engine undercover (C) and floor undercover to the body.
|
|
-2.
|
Remove the bolts (D), and detach the clips (E), then remove the floor undercover.
NOTE: To remove the clip E, pry the inner pin up at the edge near the line (F) on its head.
|
-
Install the undercover in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.
|
