SRS Symptom Troubleshooting - SRS indicator stays on but no DTCs are stored
SRS indicator stays on, but no DTC are stored
  1. Turn the ignition switch ON (II).
  1. Select Body Electrical status with the HDS.
  1. Check for DTCs in the Gauge Menu with the HDS.
Is the DTC B1187 indicated?
YES -
Go to the DTC B1187 troubleshooting.
NO -
Go to Step 6 .
  1. Check that the HDS communicates with the SRS unit.
Does the HDS communicate with the SRS unit?
YES -
Go to Step 7 .
NO -
  1. From the HDS System Menu, select SRS, then SRS in Mode Menu, PARAMETER INFORMATION, then SCS, MES, Indicator. Read the current status of the SRS indicator.
Is the status ON?
YES -
NO -