Brake Fluid Level Switch Test
Check for continuity between the terminals (1) and (2) with the float in the down position and in the up position.
NOTE:
  • Remove the brake fluid completely from the reservoir. With the float down, there should be continuity.
  • Fill the reservoir with brake fluid to the MAX (upper) level (A). With the float up, there should be no continuity.
  • If both the ABS/VSA indicator, and the brake system indicator come on at the same time, check the VSA first.
  • If the parking brake switch/fluid level switches are OK, but the brake system indicator does not function, check the VSA.